Low-Profile ‘Pour-in-Place’ Wall Anchor Features & Benefits:

• Applicable for New Concrete Construction
• Spacers available for Non-structural build-up on mounting surface.
• Very strong connection – flexibility of application.
• Economical for contractor/client.
• Minimum vertical Height- permits placement in “tight” locations; no-step on public terrace
• curb/parapet; aesthetically unobstrusive
• Corrosion resistant as required by CAN/CSA Z291-02 & Z271-10
• Allows deformation (warning) prior to any fracture;
• Does not become friable in cold temperatures;
• Ultimate Strength greater than 5000 lbs
• Life span of anchor system is not limited by sun light exposure
• ¾” Diameter loop meet requirement of CAN/CSA Z271-10

Low-Profile ‘Pour-in-Place’ Wall Anchor Features & Benefits:

• Applicable for retrofit Construction
• Spacers available for Non-structural build-up on mounting surface.
• Very strong connection – flexibility of application.
• Economical for contractor/client.
• Minimum vertical Height- permits placement in “tight” locations; no-step on public terrace
• curb/parapet; aesthetically unobstrusive
• Corrosion resistant as required by CAN/CSA Z291-02 & Z271-10
• Allows deformation (warning) prior to any fracture;
• Does not become friable in cold temperatures;
• Ultimate Strength greater than 5000 lbs
• Life span of anchor system is not limited by sun light exposure
• ¾” Diameter loop meet requirement of CAN/CSA Z271-10

Spiral ‘Pour-in-Place’ Wall Anchor Features & Benefits:

• Applicable for New Concrete Construction
• Very strong connection – flexibility of application.
• Spacers for non-structural build-up on mounting surface.
• Economical for Atlas & Contractor.

Spiral ‘Thru-Bolt’ Wall Anchor Features & Benefits:

• Applicable for retrofit Construction
• Very strong connection – flexibility of application.
• Spacer for non-structural build-up on mounting surface.
• Economical for Atlas & Contractor.

Spiral Adhesive Wall Anchor Features & benefits:

• Applicable for Retrofit Concrete Construction
• Single surface installation – Allows simple install where access to opposite surface is not available.
• Very strong connection – Flexibility of application.
• Anchor Requires Load Test once every 5 years; As per CAN/CSA Z91-02 & Z271-10, each insert
• is load tested at time of installation.
• Permits placement in “tight” locations.
• Aesthetically unobtrusive.
• No-step on public terrace curb or parapet.
• Corrosion resistant as required by CAN/CSA Z91-02, Z271-10 & CSA Z259.15.
• Allows deformation (warning) prior to any fracture.
• Does not become friable in cold temperatures.
• Ultimate strength greater than 5000 lbs.
• Life span of anchor system is not limited by sun light exposure.
• ¾” diameter spiral (for attachment of ropes) meets requirements of CAN/CSA Z271-10.
• CAN/CSA Z271-10 min. inside required clearance = 1.5” (nut & threads=1.25 therefore ½” extra clearance).